你好。
Hello.

在这张图中我想向你展示，我们如何使用计时器，好吗？
In this pictorial I want to show you, how can we use a timer, OK?

这将是 100 毫秒计时器，我们如何在 Mitsubishi Pulses 的每个开发人员中使用计时器，以及为什么 0 处于活动状态以及为什么 1 变得处于活动状态？
And this is going to be 100 millisecond timer and how can we use a timer into each developer for Mitsubishi Pulses and why zero is active and directly why one becomes active?

但是我想让为什么零在五秒后处于活动状态 为什么零处于活动状态？
But but I want to make why zero active after five second one Why zero is active?

好的，让我们把这个放到这里。
OK, let's the this one into here.

我们怎样才能在10点的时候把注意力集中在这里呢？
How can we at a time of 10 to focus here?

这一定是一个线圈。
This must be a coil.

好的？
OK?

线圈已选定。
The coil is selected.

定时器将会是并且指令是分钟，对吧？
Timer is going to be and the instruction is minute, right?

就像计时器归零一样。
Like the timer zero.

好的，以 K 开头，例如，如果我在这里转动，它将等于一秒，因为它是 100 毫秒计时器。
OK, and with the K it start with the K, for example, if I right here and turn, it's going to be equal to one second because it is 100 millisecond timer.

如果我写下 10 吨乘以 100 毫秒等于 1 秒。
If I write your ten ton multiply by 100 millisecond equals one second.

但我说五秒钟是因为这个，我会写在这里。
But I say five seconds because of this, I will write here.

50 然后当计时器处于活动状态时。
50 then when the timer is active.

像日期、时间或联系方式，那么现在我们可以，给出原因，好的，我将转换所有程序，然后将其发送给您。
Like date, time or contact, then now we can, giving out why one, OK and I will convert all programs and I will send it to keep you.

执行的主程序。
The main program that's executed.

那我就说是的。
Then I will say yes.

我们还需要再等一下。
And we need to wait a little bit more.

那我就说是的。
Then I will say yes.

它已经完成，我会说现在我们可以监视或保持监视状态，这是策略错误的条件之一。
And it's completed, and I will say close now we can monitor or keep the monitor status, and it is one condition the policy wrong.

以及我们需要什么。
And what we need.

为什么零将被激活然后计时器将计数。
Why zero will be active then timer will that count.

当五秒后五秒结束时，为什么一会被激活，按下启动按钮并根据设备的口味，我会说切换力九，那么为什么五秒后零被激活，二、三、四和五，为什么一个人是活跃的。
And when the five second finished after five seconds, why one will be active and this press start button and with the device taste, I will say toggle force nine, then why zero is active and two and three and four and five after five second, why one is active.

它将停止按钮和设备状态并切换暂停以及从开到关状态，因为下面的 H 和我会说为什么零现在是关闭状态。
It is going to stop button and device status and toggle pause and from on to off condition, because the following H and I will say then why zero is now off condition.

联系方式消失了。
The contact is gone.

这意味着这一切都完成了。
That means this is all done.

无定时器输出，则再次测试定时器输出、触点或定时器触点。
There is no timer output, then timer output, contact or timer contact now of its test once more.

它是计时器吗？
And is it timer?

所有定时器是否都在运行？
Is all timer running or not?

我会说再切换一次力量。
I will say toggle force one more.

我按下开始按钮，现在正在计时。
I am pressing start button and it's counting now.

聚焦到三、四和五，我们就有了输出。
Focus to three, four and five and we have an output.

好的？
OK?

这是使用计时器的最简单方法，您可以问，好吧，这是计时器零，但您可以将其更改为正确的模式。
This is the easiest way to use a timer and you can ask, OK, this is timer zero, but you can change it, OK, into right mode.

你可以在这里，例如定时器50，这样，OK，进入策略参数下的设备区域。
You can right here, for example, timer 50, like that, OK, into the device area under the policy parameter.

你可以看到计时器范围，好吗？
You can see the timer range, OK?

这是第一件事，也是非常重要的一点。
This is the first thing this is really important point.

我们如何使用定时器呢？
How can we use the timer?

我们也可以使用这样的定时器来进行顺序控制。
We can use a timer like that for sequential control also.

我们还可以做一些其他的适配，比如我可以等这个定时器OK后把这个删掉，换成定时器50吧。
We can do and other adaptations, for example, I can delete this one after this timer is OK, and let's change to timer 50.

好的，我可以用线圈遇到这里，例如我需要选择时间为 5。
OK, I can run into here with the coil, I need to select time of five, for example.

好的。
OK.

17.

17.

七秒后，让我们在这里插入一行 L.D 计时器五现在，然后退出。
After seven seconds later, let's insert a line here L.D timer five now, then out.

为什么？
Why?

好的。
OK.

让我们再做一个小应用程序，将其转换并发送给 KLC 域执行。
And let's do one more and other small application and convert it and send it to do KLC Domain execute.

我会说是的。
And I will say yes.

好的，现在已经完成了。
OK, now it's completed.

我们需要继续。
We need to continue.

我将进入监视模式。
I will just go to monitor mode.

让我们使用“开始”按钮、语音测试和切换力来启动我们的系统，以及为什么零在五秒三四五后现在处于活动状态。
And let's start our system with the Start button and the voice test and toggle force and why zero is active now after five seconds three four five.

另一个计时器将进行计数，七秒后，我们将得到一个输出。
Another timer is going to be count and after seven seconds later, we will get an output.

好的，现在我们有了白色的输出。
OK, and now we have an output from the white one.

这时候我们该如何使用定时器呢？
This is how can we use a timer?

这真的很容易使用。
This is really easy to use.

计时器对于我们的项目也非常重要。
A timer and timers are also really important for our projects.

下一篇教程见。
See you into next tutorial.